MCE remote ei toimi *RATKAISTU*

[noeikujoo]

Vaihdoin emolevyn, prossun ja muistit, mutta MCE USB-vastaanotin lakkasi toimiasta. Irw ei tulosta enää mitään terminaaliin, jos kaukosäätimen näppäimiä painelee. Muut USB-laitteet (hiiri, näppis, jne) toimivat normaalisti.

Dmesg tulostaa seuraavaa, kun vastaanottimen kytkee koneeseen kiinni:

Koodi: Valitse kaikki

[  115.560331] usb 3-2: new full-speed USB device number 9 using xhci_hcd
[  115.578509] usb 3-2: New USB device found, idVendor=0471, idProduct=0815
[  115.578518] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  115.578523] usb 3-2: Product: eHome Infrared Transceiver
[  115.578527] usb 3-2: Manufacturer: Philips
[  115.578531] usb 3-2: SerialNumber: PH00P6KT
[  115.580026] Registered IR keymap rc-rc6-mce
[  115.580179] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/rc/rc1/input16
[  115.580315] rc1: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/rc/rc1
[  115.580498] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input17
[  115.580792] rc rc1: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[  115.756569] mceusb 3-2:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
[  115.756579] mceusb 3-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)

Ja lsusb tulostaa seuraavaa:

Koodi: Valitse kaikki

[  115.560331] usb 3-2: new full-speed USB device number 9 using xhci_hcd
[  115.578509] usb 3-2: New USB device found, idVendor=0471, idProduct=0815
[  115.578518] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  115.578523] usb 3-2: Product: eHome Infrared Transceiver
[  115.578527] usb 3-2: Manufacturer: Philips
[  115.578531] usb 3-2: SerialNumber: PH00P6KT
[  115.580026] Registered IR keymap rc-rc6-mce
[  115.580179] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/rc/rc1/input16
[  115.580315] rc1: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/rc/rc1
[  115.580498] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input17
[  115.580792] rc rc1: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[  115.756569] mceusb 3-2:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
[  115.756579] mceusb 3-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)

Onko vinkkejä, miten saada kaukosäädin taas toimimaan?

[noeikujoo]

Kaukosäädin lähti toimimaan, kun disabloin biossista usb-asetuksista xhci:n.